Tiny SA Ultra (Electronic Warfare) RusMil Firmware (v1.72)
£5.00
*Updated version- v1.72 disclaimer, the menu of this is in russian, I advise using a phone with google lens to translate the text, once you've used it a few times you'll learn what certain words mean.
-Updates-
1) Approaching signals- are now ranked by the speed of increase (approaching the source) We can now use the 'red, yellow & green' system to quickly visually see what's coming and going. Green signals- haven't changed in strength. Yellow signals- have increased slowly, (default +1dBm per second = 50-100m/per sec) Red signals- increase quickly (default +2dBm per second =100-200m/ per sec)
2) A zoom setting "cutoff" if a signal grows by more than 7dBm (adjustable) per second, it cant be a UAV approaching. For example if a near by WIFI router turns on, it wouldn't be flagged as dangerous.
To successfully flash the TinySA Ultra frequency analyser, begin by installing the STM32CubeProgrammer software package on your computer.
Once the installation is complete, connect the Type-C cable to the analyser. While holding the joystick, power on the Tinysa Ultra; the screen will remain black, indicating that you have entered DFU mode.
Once the screen is black, open up STM32 Cube programmer and click “USB” from the right hand menu, then click connect.
Once connected, you’ll see data filling out a form in the middle of the screen. On the left, press the download button. Simply find your firmware and click upload. It’s that easy! 🙌
For guidance on updating or installing the firmware, refer to the following link: https://tinysa.org/wiki/pmwiki.php?n=main.updatingthefirmware.
It's essential to check back here regularly, as I will provide new firmware versions as they are released, so consider revisiting the site every month for the latest updates.
If you want to have a 1 to 1 with me to talk through this software, just book a 30 minute time slot in my appointments section.
All software / Firmware has been checked and is bug/virus free.
Big Thanks!- Curtis